Maxtrac

MAX TRAC SUSPENSION'S PART# 949942-1 IS A 4.5" LIFT FRONT BOX KIT INCLUDING FRONT COILS, BUMP STOP EXTENSIONS, TRAC BAR & HARDWARE

MAX TRAC SUSPENSION'S PART# 949942-2 IS A 2" LIFT REAR BOX KIT INCLUDING COILS, BUMP STOP EXTENSIONS, BRAKE LINE BRACKETS, SWAY BAR END LINKS & HARDWARE

MaxTrac 2021+ Ford F-150 2in Front Lowering Spindles

Maxtrac 2021+ Ford F-150 2WD 4in Lift Spindles

MAX TRAC SUSPENSION'S PART# 853100 IS A PAIR OF FRONT UPPER CONTROL ARMS FABRICATED FROM STEEL & POWDER COATED GREY

Maxtrac 21-24 Ford F-150 3/5in. Lowering Kit- (Requires 22in. Rims or Larger)

3.5in. lift spindles made from ductile iron and e-coated. Comes with all necessary hardware. Recommended wheel size is 16in. or larger with 4 5/8 back spacing. Recommended tire size is 295x75.Track...

Twin Tube Gas Shock; Stem/Loop; 26.50 in. Extended; 16.00 in. Collapsed; Incl. Hardware; Stem Pack; 9/16 in. Sleeve;Includes All Necessary Hardware

twin type gas charged shock. Stem/Loop 12.3in. extended 8.1in. collapsed. Hardware included stem pack/2.5in. bar pin.Includes All Necessary Hardware

Axle Flip Kit; 5 in. Drop; Power Coated Grey; Incl. 2 Axle Relocators; All Necessary Hardware;New Shocks Recommended

Twin Tube Gas Shock; Loop/Loop; 20.30 in. Extended; 12.40 in. Collapsed; Incl. Hardware; Two 0.4375 in. Sleeves; Must Be Installed w/Shock Shaft Towards The Top;Shock

Maxtrac coil springs are made in the USA; Hot wound for precise tolerances that will not fade over time. Powder coated grey to eliminate rust.Provides Comfortable Ride

Our 3/5 drop is a great way to lower and level out your vehicle without breaking the budget. This budget friendly kit comes with 3-inch lowering coil springs and twin tube shocks for the front. The...

Set of (4) U-bolts with thick nuts and washers. Specs are 2.925in. ID x 10.75in. long round end.

Maxtrac coil springs are made in the USA; Hot wound for precise tolerances that will not fade over time. Powder coated grey to eliminate rust.Provides Comfortable Ride

Twin tube gas charged shock. Must be installed with shock shaft towards the top. Loop/Loop 24.5in. extended 14.6in. collapsed. Hardware included Qty (2) 9/16 sleeves.Includes All Necessary Hardware

Twin tube gas charged shock. Must be installed with shock shaft towards the top. Loop/Loop 22.3in. extended 13.4in. collapsed. Hardware included Qty (2) 9/16 sleeves.Includes All Necessary Hardware

MAX TRAC SUSPENSION'S PART# 910101 IS A SET OF 9/16" SQUARE U-BOLTS FOR 1" / 1.5" LIFT BLOCKS (MOST APPLICATIONS)

MAX TRAC SUSPENSION'S PART# 910102 IS A SET OF 9/16" SQUARE U-BOLTS FOR 2" LIFT BLOCKS (MOST APPLICATIONS)

MAX TRAC SUSPENSION'S PART# 910104 IS A SET OF 9/16" SQUARE U-BOLTS FOR 3" & 4" LIFT BLOCKS (MOST APPLICATIONS)