Maxtrac

The Maxtrac Suspension 4-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and...

The Maxtrac Suspension 6-inch lift for the Ford Ranger is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and...

Maxtrac coil springs are made in the USA; Hot wound for precise tolerances that will not fade over time. Powder coated grey to eliminate rust.

Suspension Lift Kit w/Shocks; 2 in. Rear Lift; Incl. Lift Blocks; U-Bolts; Fox Rear Shocks

MaxTrac 05-18 Toyota Tacoma 2WD 6 Lug 4in Rear FOX 2.0 Performance Shock Absorber

Suspension Lift Kit w/Shocks; 4 in. Rear Lift; Incl. Strut Spacers; Lift Blocks; U-Bolts; Carrier Bearing Drop Bracket; Maxtrac Shocks

The Maxtrac Suspension 4-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and...

The Maxtrac Suspension 6.5-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and...

Fabbed steel tapered lift blocks powder coated grey to prevent rust. Has two center pin holes. Please make sure to use the correct hole when installing.

MaxTrac 07-18 Jeep Wrangler JK 2WD/4WD 3in Front FOX 2.0 Performance Shock Absorber

MaxTrac 07-18 Toyota Tundra 2WD 1.5in Rear Cast Iron Lift Blocks

MaxTrac 07-18 Toyota Tundra 2WD/4WD 1in Rear Cast Iron Lift Blocks

Axle Flip Kit; 5 in. Drop; Incl. Axle Relocators/Spring Plates/U-Bolt Retainer Plates/U-Bolts/Bump Stops/Greaseable Shackles And All Necessary Hardware;

Leaf Spring Shackle Kit; 1 in. Lift; Rear; Incl. Bushings And Are Greasable;

MaxTrac 15-20 Ford F-150 2WD 0-3in Front Adj. Lowering Struts - Pair

3.5in. lift spindles made from ductile iron and e-coated. Comes with all necessary hardware. Recommended wheel size is 16in. or larger with 4 5/8 back spacing. Recommended tire size is 295x75.

Maxtrac coil springs are made in the USA; Hot wound for precise tolerances that will not fade over time. Powder coated grey to eliminate rust.

Twin Tube Gas Shock; Stem/Loop; 26.50 in. Extended; 16.00 in. Collapsed; Incl. Hardware; Stem Pack; 9/16 in. Sleeve

Axle Flip Kit; 5 in. Drop; Power Coated Grey; Incl. 2 Axle Relocators; All Necessary Hardware;

Set of (4) U-bolts with thick nuts and washers. Specs are 2.925in. ID x 10.75in. long round end.

Twin tube gas charged shock. Must be installed with shock shaft towards the top. Loop/Loop 24.5in. extended 14.6in. collapsed. Hardware included Qty (2) 9/16 sleeves.

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 8.75in. long square end.

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 10.00in. long square end.

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 12.50in. long square end.