Maxtrac

The Maxtrac Suspension 4.5-inch lift for the Ford F-150 is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and...

Lift Block And U-Bolt Kit; 4 in. Rear; Incl. Blocks; U-Bolts; Rear Fox Shocks;

The Maxtrac Suspension 7-inch lift for the Ford F150 is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering...

Leaf Spring Shackle Kit; 1 in. Lift; Rear; Incl. Bushings And Are Greasable;

MaxTrac 15-20 Ford F-150 2WD 0-3in Front Adj. Lowering Struts - Pair

Axle Flip Kit; 4 in. Drop; Incl. Spring Hangers/Axle Relocators/Spring Plates/U-Bolt Retainer Plates/U-Bolts; Bump Stops; Carrier Bearing Relocation Hardware/All Hardware;

This 3" MaxPro lift kit comes complete with front and rear dual rate coil springs. Dual rate springs will achieve more articulation over linear rate springs along with a very smooth ride on the road...

This is a set of (4) twin tube variable valved gas charged shocks. All hardware is included to complete the installation.

This is a set of (4) Fox 2.0 aluminum body shocks that are tuned to this application. All hardware is included to complete the installation.

Take your Jeep to the next level with the Maxtrac 3" MaxPro Lift Kit. Maxtrac Suspension specifically designed this kit for use with the four-door JL Wrangler with ride compliance and load handling...

3.5in. lift spindles made from ductile iron and e-coated. Comes with all necessary hardware. Recommended wheel size is 16in. or larger with 4 5/8 back spacing. Recommended tire size is 295x75.

Maxtrac coil springs are made in the USA; Hot wound for precise tolerances that will not fade over time. Powder coated grey to eliminate rust.

Twin Tube Gas Shock; Stem/Loop; 26.50 in. Extended; 16.00 in. Collapsed; Incl. Hardware; Stem Pack; 9/16 in. Sleeve;

twin type gas charged shock. Stem/Loop 12.3in. extended 8.1in. collapsed. Hardware included stem pack/2.5in. bar pin.

Axle Flip Kit; 5 in. Drop; Power Coated Grey; Incl. 2 Axle Relocators; All Necessary Hardware;

Twin Tube Gas Shock; Loop/Loop; 20.30 in. Extended; 12.40 in. Collapsed; Incl. Hardware; Two 0.4375 in. Sleeves; Must Be Installed w/Shock Shaft Towards The Top;

Set of (4) U-bolts with thick nuts and washers. Specs are 2.925in. ID x 10.75in. long round end.

Twin tube gas charged shock. Must be installed with shock shaft towards the top. Loop/Loop 24.5in. extended 14.6in. collapsed. Hardware included Qty (2) 9/16 sleeves.

Twin tube gas charged shock. Must be installed with shock shaft towards the top. Loop/Loop 22.3in. extended 13.4in. collapsed. Hardware included Qty (2) 9/16 sleeves.

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 8.75in. long square end.

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 10.00in. long square end.

Set of (4) U-bolts with thick nuts and washers. Specs are 2.63in. ID x 12.50in. long square end.