DV8 Offroad

* Please Note: The tire carrier can fit up to a 20-inch wheel and a 38” x 13.5” tire. We recommend using the carrier with wheels that have a 4+ inch backspacing, as it is not compatible with -44...

Our Slim Fender Flares for the Jeep Gladiator were designed for a sleek and aggressive off-road style. Their slim width enables you to fit in tighter spaces on the trail. Their full steel structure...

The Spec Series Fender Flares for the Jeep Gladiator offer increased articulation, protection, and an aggressive style. They were designed to open up additional clearance in the wheel well while...

The perfect add-on to DV8's Quick Release Fire Extinguisher mount as it allows you to quickly reach your flashlight or fire extinguisher at the base of the driver's (or passenger's) seat. The steel...

The DV8 Offroad Dana 44 Rear Differential Skid Plate for the Wrangler JK protects the rear diff housing and pinion from rock impacts and helps prevent diff cover leaks on the trail. It uses seven...

Front inner fenders for 2007-2018 Jeep Wrangler JK models designed to help protect engine bay components from trail debris while improving airflow. Constructed from lightweight aluminum with a...

The DV8 Offroad Jeep Wrangler JK Rear Shock & Link Skid Plates provide bolt-on protection for the factory rear shock and link mounts. Their single-piece design reinforces the thin OE brackets and...

The DV8 Offroad Tailgate Reinforcement Molle Panel strengthens the Jeep Wrangler JK tailgate by spreading spare-tire weight across the door, reducing stress on factory hinges. It supports running 35"...

DV8 Off Road's shift knobs are made from billet aluminum and feature our patented 'Tired Tread' design grip which not only feels good when resting your hand on it, but also provides a better tactile...

Our Slim Front Door Molle Pockets replace the saggy factory netting with rigid steel panels, so you never have to worry about your pockets getting stuck between your door frames again. Mount knife...

Machined from 6061-T6 billet aluminum with a brushed and textured surface and clear anodized finish, these caps are the perfect dress-up accessory for showing off what's under your Jeep's hood...

If your rig is equipped with aftermarket fenders, protect your exposed engine compartment from rocks and debris when off-road with our Front Inner Fenders. For proper airflow, the inner fenders...

Pair these A-Pillar Dual Light Pod Mounts with our LBJL-10 Light Bar Mount (required) to attach (2) 3-inch light pods on each side of your hood cowl. This setup maximizes trail lighting without...

This Overhead Molle Panel adds convenient interior storage and mounting options for the Wrangler and Gladiator. Mount molle pouches, radios, or accessories while keeping small gear stored above the...

Our Jeep Wrangler JL Roof Mount for the 15” x 12” Universal Molle Panel (UNMP-04) creates a secure overhead mounting point using the factory hardtop freedom panel area. Made from lightweight, strong...

The DV8 Jeep Wrangler JL Tailgate Reinforcement Molle Panel reduces strain on the factory hinges by distributing weight across the entire tailgate and adds secure molle mounting for gear. It...

Our A-Pillar Dual Light Pod Drop Mounts provides options to mount (2) 3-inch light pods on each side of the vehicle. The top light mounting point is perfect for forward-facing or angled lighting. The...

Our Front License Plate Mount relocates your plate at the center of your bumper and out of the way of the grille. This allows for maximum airflow to the engine compartment. It was designed to be...

The sleek design and added satin black aluminum accent panels complements your rigs styling. Installation is easy due to the fully bolt-on design. The bumper is compatible with the OEM tire carrier...

Our Rear Storage Compartment provides improved space with 54% more volume and a sturdier design compared to the flimsy factory storage box. With increased capacity, you can store air hoses, recovery...

The DV8 Offroad Tailgate Reinforcement Molle Panel for the Ford Bronco strengthens the factory rear door while adding versatile gear mounting capability. Designed to help distribute weight evenly...

Improve your interior storage capabilities with our Center Console Molle Panels and Device Mount. You can mount multi-tools, med kits, sheaths, holsters, and other molle accessories to the driver and...

Our Air Compressor Mount & Storage Box provides a hidden & convenient location for mounting an ARB single or twin on-board air system compressor. A rubber grommet and access hole provides easy wire...

The new Broncos are known to have a visibly unfinished pinch weld on those models not running factory or aftermarket sliders. We?ve designed a powder coated steel cover to clean up and finish out the...

Our Capable Bull Bar is designed for the OEM Capable Front Bumper, and provides lighting options and light protection when off-road. A 13 to 20-inch dual or single row light bar can be mounted either...

DV8s Tire Carrier assumes the weight of the spare tire and reinforces the tailgate. It retains the factory tailgates capacity to open-up greater than 150. Included with the carrier is an antenna/whip...

Our Inner Fenders were designed to replace the plastic/rubber factory fender liners. They not only help protect the engine compartment from dirt, mud, & other debris; but also add unique styling to...

Our Tundra Molle Panels & Digital Device Bridge provide efficient ways to keep your everyday items and handheld devices close and accessible. The driver & passenger side panels provide an excellent...

Our Rock Sliders protect your truck’s side panels, and their low-profile design retains the factory side clearance. The sliders are made from 4mm tube and plate steel, and they are finished in a...

Bolt-on brush guard designed to work with the factory bumper and recovery points. Adds front-end protection against brush and light debris, and a rugged appearance while retaining full compatibility...