Tools

This rotary file set is ideal for every technician. Beready to elongate slots in Aluminum and Steel frames andbrackets to accept larger offset cams. The kit includes one85127 rotary file for steel and one 85137 rotary file foraluminum and cutting fluid (

These wrenches make presetting our adjustable truck sleeves(24160,24180,24120,24130) easier for the installer.

Turn any 9/16" [14 mm] hole into a precise and clean 16mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" [38mm]. Use this tool to quickly and...

These wrenches makes presetting our adjustable truck sleeves(24160,24180,24120,24130) easier for the installer. Whenusing the 74400 wrench it is recommended that the openingbe equally positioned over the slot opening of the sleevebody.

Our patented thrust alignment plate will allow forcorrections of setback and thrust angle on most vehicleswith rear leaf springs. Installation is made by looseningthe U-bolts holding the leaf spring to the axle, installingthe alignment plate between the a

Use this press tool to remove stuck OE cam sleeves fromToyota trucks. The extended length forcing screw allowsyou to remove the sleeve without removing the steering rack.Recommended when installing our 25430, 25435, 25440 and25445 replacement Toyota cam.N

Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.

Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.

NO RETRN BEARING RACE DRIVER, CHY 8.75", 9.25, FORD 7.5", 8.8", 9", 9.75", GM 12P, 12T, 8.5", 8.6"

Adjusts the threaded side adjusters for setting backlash and carrier bearing preload. No return.

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look...

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look...

This tool securely holds the yoke to provide leverage while working on the differential. No returns.

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look...

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25" &...

Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.

Easily extract broken off cross pin bolts from a carrier. Yukon tools help save time and money by speeding up the installation process. All Yukon tools are manufactured to provide years of usage in any shop.

Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.

LP Aventure Subaru Crosstrek 24+ AND WRX 22+ Jack Spacer

LP Aventure 2020+ Subaru Outback Jack Spacer

LP Aventure Subaru Jack Spacer (Excl 2020+ Subaru Outback / 2019+ Subaru Ascent)

Rancho® bushing kits are available in a high-grade polyurethane, for a variety of shock and leaf-spring applications

SuperPro 19-23 Ford Ranger Pin Protector Cap

ACT Clutch Alignment Tool Specifications Item Description: ACT Clutch Alignment Tool Product Weight (lbs.): 0.1 Warranty: ACT 12 Months Description ATCP9 is an alignment tool that facilitates the installation of an ACT pressure plate by correctly...

ATGM010 is an alignment tool that facilitates the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with the transmission input shaft.

AT90 is an alignment tool that facilitates the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with the transmission input shaft.

AT11 is an alignment tool that facilitates the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with the transmission input shaft.

AT05 is an alignment tool that facilitates the installation of an ACT pressure plate by correctly aligning the clutch disc with the pilot bearing. This results in easy alignment with the transmission input shaft.

Designed to assist in the installation of streetch fit belts on certain Subaru applications.

Gates Micro-V Stretch Fit Belt Installation Tool